Machining forHouma.
Machine Tech Services serves Houma and Terrebonne Parish, Louisiana from Broussard, roughly seventy-five miles away. Work for this area is typically oilfield and offshore support equipment, including purpose-built and recovery components.
- Parish /
- Terrebonne Parish
- Distance /
- 75 road miles
- Drive /
- about 1 hour 30 minutes
- Industry /
- Oilfield services · Offshore support
Machine Tech Services serves Houma and Terrebonne Parish, Louisiana from Broussard, roughly seventy-five miles away. Work for this area is typically oilfield and offshore support equipment, including purpose-built and recovery components.
What we actually seefrom Houma.
- 01
Houma is one of the largest oilfield service centres in south Louisiana and the land base for a great deal of Gulf of Mexico work.
- 02
The concentration of service companies means the work skews toward purpose-built equipment and recovery hardware rather than routine maintenance parts.
- 03
It is the kind of distance where quoting has to account for freight, so Houma work is usually planned rather than emergency.
About 90 minutes. Quoted with freight; scheduled runs for repeat customers.
Parts we machine most for Houma
What this area asks for most often. It is not a catalogue limit — if it can be machined, it can be quoted.
Flanges
Machine Tech Services machines custom flanges and flanged connections to your drawing, including bolt circles, faced sealing surfaces, counterbores and large-diameter work up to approximately 40 inches.
Read →Manifold Blocks
Machine Tech Services machines custom manifold and valve blocks — cross-drilled internal porting, tapped ports, counterbores and flat sealing faces — from solid stock to your print.
Read →Shafts
Machine Tech Services machines custom shafts to your drawing or from an existing sample — including drive shafts, spindle shafts, stub shafts, keyed shafts and splined shafts in carbon, alloy and stainless steel.
Read →Wellhead Components
Machine Tech Services machines wellhead components and wellhead-related parts to specification, drawing on three decades of oilfield manufacturing and our own patented wellhead systems.
Read →Every part is measured against your tolerances before it leaves the shop, whether it is going nine miles up the road or onto a truck to Houston.
Houma — Common Questions
Does Machine Tech Services work with customers in Houma?
- Machine Tech Services serves Houma and Terrebonne Parish, Louisiana from Broussard, roughly seventy-five miles away. Work for this area is typically oilfield and offshore support equipment, including purpose-built and recovery components.
How far is Machine Tech Services from Houma?
- The shop is at 1232 Wall Rd in Broussard, roughly 75 miles from Houma — about 1 hour 30 minutes by road. About 90 minutes. Quoted with freight; scheduled runs for repeat customers.
What kind of parts does Machine Tech Services make for Houma customers?
- Most Houma-area work falls into oilfield services, offshore support, marine. Common components include flanges, manifold blocks, shafts, wellhead components. Anything machinable can be quoted — the list is what comes up most, not a limit.
Can Machine Tech Services make a part if I do not have a drawing?
- Yes. Bring the broken component, an existing sample or photographs. We measure it, model it and manufacture a production-ready replacement. No documentation is required to start.
Other areas we cover
Need a part in Houma?
About 90 minutes. Quoted with freight; scheduled runs for repeat customers. Send a drawing, a photo, or the broken component itself.