Precision.Performance.Possibilities.
Machine Tech delivers advanced machining solutions built for accuracy, reliability, and long-term performance. From prototype to production, we power what moves the world.
Companies & organizations we have served
Since 1992
Machine Tech Services has manufactured for 30 named companies and public bodies since 1992, across oil and gas, aerospace and municipal work — from single emergency parts to full production runs.
- Halliburton
- Baker Hughes
- SLB
- Weatherford
- TechnipFMC
- NOV
- GE Oil & Gas
- Kelly Valve Sales and Service
- BlueFin Field Services
- Hydroplex
- Superior Energy Services
- Superior Performance
- Supreme Services
- Wild Well Control
- River Rental Tools
- Dynasty Energy Services
- Premium Oilfield Technologies
- Forum Energy Technologies
- Oil States
- Innovex
- E.P. Breaux Utility Services
- Seatrax
- Blowout Tools
- Dishman & Bennett
- Leonardo Helicopters
- Bell Helicopter
- Rotor Blades, Inc.
- City of Broussard
- City of Youngsville
- City of New Iberia
If It Were Easy,You Would Not Be Calling.
The parts that come to us are the ones somebody else could not make, could not source, or could not get in time. No drawing left. A tolerance that will not forgive. A vessel tied up waiting. That is the work this shop is built around.
Three decades of pressure-containing oilfield work is where our depth and our five patents came from, and it taught us to build components that cannot be allowed to fail. We are still a full job shop — bring us a bracket and we will make the bracket. But the reason to call us is the one nobody else will touch.
Where the work is today
Also served
Not on the list? That is not a problem — it is just a part we haven’t made yet.
From Drawing to Finished Part.
Machine Tech Services combines machining, fabrication, engineering and production experience under one roof. Whether the customer needs a single replacement component, production manufacturing or a completely new piece of equipment, MTS can take the project from concept through production.
Machining
CNC & manual machining
Turning, milling, boring and drilling of close-tolerance components in materials from engineered plastics through stainless steel.
Precision Production
Repeatable production runs
Production manufacturing built around repeatability, documentation and dimensional consistency across every part in the run.
Custom Fabrication
Weldments & assemblies
Custom weldments, structural fabrication and finished assemblies fabricated to drawing or built from a concept.
Welding
Certified-quality welding
Structural and pressure-oriented welding on carbon steel, stainless and specialty alloys for demanding field service.
Design & Drafting
Engineering & CAD
In-house design, drafting and manufacturing planning to take a project from concept and rough sketch to production-ready drawing.
Prototyping
First articles & proofs
Rapid first-article and proof-of-concept components so a design can be validated before committing to a production run.
Specialty Manufacturing
Purpose-built equipment
Purpose-built oilfield and industrial equipment engineered and manufactured around a specific field application.
Reverse Engineering
Replicate from sample
No drawing? We measure, model and manufacture from an existing sample or damaged part and deliver a production-ready component.
We Don’t Just Machine Parts.We Invent Them.
Three decades in the oilfield produced problems that did not have a part number. These are the US patents behind our products.
Modular Wellhead
A modular wellhead built from stackable sections rather than a single fixed assembly, so the configuration can be adapted to conditions found in the field — including damaged-well recovery and diver-assisted work.
Read →Mud Bucket
An enclosure that surrounds a drill-pipe connection and uses fluid-driven actuators to open and close around it, capturing drilling fluid released when the connection is broken and draining it away.
Read →Pulverizer / Grinder
A grinder built around a horizontal shaft carrying multiple rotors that reduces rock and drilling cuttings.
Read →Side Door Hanger
A hanger system that allows cables, lines and conduits to pass through a wellhead while maintaining a seal — which is what makes it possible to hang an ESP without cutting and splicing the power cable.
Read →Containment / Pass-Through
A family of grants that extends the sealed pass-through concept with interchangeable configurations, so different cables, lines and conduits can pass into a well while containment is maintained.
Read →Drawing In.Finished Part Out.
Four steps, one shop. Nothing gets subcontracted out of sight and nothing ships without being measured.
Send What You Have
A drawing, a spec, a photo, a sample or the broken part itself. No documentation required — if you only have the failed component, that is enough to start.
We Quote It Straight
We tell you what we can hold, what it will cost and when you can have it. If it is not something we should be making, we say so.
Machined & Fabricated
CNC and manual turning, milling, boring, threading, welding and assembly — engineered plastics through stainless steel, up to about 40 inches in diameter.
Inspected, Then Released
Dimensional inspection against your tolerances before anything ships, with material identification and job records that follow the part.
Only certifications MTS currently holds and can verify are shown.
Questions We Get
What does Machine Tech Services do?
Machine Tech Services is a full-service machine shop and precision manufacturer in Broussard, Louisiana. We are a job shop, which means we make custom parts to order for any industry — CNC and manual machining, custom fabrication, welding, design and drafting, prototyping and reverse engineering. Our deepest experience is in oil and gas, but we manufacture for marine, industrial, OEM, agricultural, transportation and one-off customers alike. We have been machining from the same Acadiana location for more than 30 years.
Does Machine Tech Services only work in oil and gas?
No. Machine Tech Services is a job shop and manufactures parts for any industry. Oil and gas is where we built our deepest experience and our patents, but we routinely machine and fabricate for marine, industrial plants, OEMs and equipment builders, agriculture, transportation, construction and prototype work. If it can be machined, we can make it — bring us the drawing, the sample or the broken part.
Can Machine Tech Services make a custom part for my industry?
Almost certainly. We work from your drawing, specification or a sample rather than a fixed catalog, so the industry matters less than the part. Machine Tech Services machines materials from engineered plastics through stainless steel, up to approximately 40 inches in diameter, in quantities from a single replacement component to a production run. Send it to us at machinetechservices.com/request-a-quote and we will tell you what we can do.
Where is Machine Tech Services located?
Machine Tech Services is located at 1232 Wall Rd, Broussard, Louisiana 70518, in the heart of the Acadiana energy corridor just outside Lafayette. We serve customers across South Louisiana and the Gulf Coast. You can reach the shop at 337-837-2314.
What is the largest part Machine Tech Services can machine?
Machine Tech Services can manufacture components up to approximately 40 inches in diameter. If your part is near or above that size, send the drawing and we will confirm what we can hold before you commit.
What materials can Machine Tech Services machine?
We machine materials ranging from engineered plastics through stainless steel, including carbon steel, alloy steels such as 4140 and 4340, stainless grades such as 316 and 17-4 PH, aluminum and engineered plastics. Tell us the service conditions and we can help select an appropriate material.
Have a Part?Send Us the Drawing.
No drawing? Send us photos or talk to our team. We’ll help you determine specifications and get a component into production.
Attach Your Files
Upload multiple drawings, models and photos. We accept the formats that come off your CAD system and your phone.