Machining forMorgan City.
Machine Tech Services serves Morgan City, Louisiana from Broussard, about fifty miles away. Work for this area is largely marine: vessel shafting, line boring, bushings and machined weldment features for shipyards and offshore support operations.
- Parish /
- St. Mary Parish
- Distance /
- 50 road miles
- Drive /
- about 1 hour
- Industry /
- Shipyards & marine fabrication · Offshore support vessels
Machine Tech Services serves Morgan City, Louisiana from Broussard, about fifty miles away. Work for this area is largely marine: vessel shafting, line boring, bushings and machined weldment features for shipyards and offshore support operations.
What we actually seefrom Morgan City.
- 01
Morgan City sits at the mouth of the Atchafalaya and was the launch point of the modern offshore industry — the first well out of sight of land was serviced from here.
- 02
It is a working shipyard and marine fabrication town, so the components are vessel hardware: shafting, rudder and steering gear, line-bored housings.
- 03
Marine work brings a specific problem the shop is set up for — long or slender shafting that has to be supported so it does not deflect and chatter.
About an hour each way. Freight or a scheduled run depending on size and urgency.
Parts we machine most for Morgan City
What this area asks for most often. It is not a catalogue limit — if it can be machined, it can be quoted.
Shafts
Machine Tech Services machines custom shafts to your drawing or from an existing sample — including drive shafts, spindle shafts, stub shafts, keyed shafts and splined shafts in carbon, alloy and stainless steel.
Read →Housings & Bodies
Machine Tech Services machines custom housings and bodies — pump bodies, gearbox housings, bearing housings and equipment enclosures — with the bores, faces and mounting features held in relation to each other.
Read →Weldments & Assemblies
Machine Tech Services fabricates custom weldments, frames, skids and welded assemblies, then machines the critical features on the same part in the same shop.
Read →Bushings & Sleeves
Machine Tech Services machines custom bushings, sleeves, wear sleeves and liners in bronze, steel, stainless and engineered plastics, sized to your shaft and housing rather than to a catalog.
Read →Every part is measured against your tolerances before it leaves the shop, whether it is going nine miles up the road or onto a truck to Houston.
Morgan City — Common Questions
Does Machine Tech Services work with customers in Morgan City?
- Machine Tech Services serves Morgan City, Louisiana from Broussard, about fifty miles away. Work for this area is largely marine: vessel shafting, line boring, bushings and machined weldment features for shipyards and offshore support operations.
How far is Machine Tech Services from Morgan City?
- The shop is at 1232 Wall Rd in Broussard, roughly 50 miles from Morgan City — about 1 hour by road. About an hour each way. Freight or a scheduled run depending on size and urgency.
What kind of parts does Machine Tech Services make for Morgan City customers?
- Most Morgan City-area work falls into shipyards & marine fabrication, offshore support vessels, oilfield service. Common components include shafts, housings & bodies, weldments & assemblies, bushings & sleeves. Anything machinable can be quoted — the list is what comes up most, not a limit.
Can Machine Tech Services make a part if I do not have a drawing?
- Yes. Bring the broken component, an existing sample or photographs. We measure it, model it and manufacture a production-ready replacement. No documentation is required to start.
Other areas we cover
Need a part in Morgan City?
About an hour each way. Freight or a scheduled run depending on size and urgency. Send a drawing, a photo, or the broken component itself.